Sbworkshop 3.71 Crack Free
Click Here --->>> https://blltly.com/2tzlIn
Sbworkshop 3.71: A Software Tool for Smart Battery Repair
If you have a laptop with a smart battery, you may have encountered some problems with its performance over time. The battery may not hold a charge as long as it used to, or it may show inaccurate information about its capacity, voltage, temperature or health status. These problems can affect your laptop's usability and lifespan, and may require you to replace the battery sooner than expected.
However, before you decide to buy a new battery, you may want to try sbworkshop 3.71, a software tool that allows you to read, write, edit and repair smart battery data. Sbworkshop 3.71 can help you reset the battery's EEPROM chip, which is the memory that stores all the information about the battery's characteristics and history. By resetting the EEPROM chip, you can restore the battery to its factory defaults and clear any errors or flags that may have accumulated over time.
Sbworkshop 3.71 is compatible with most of the smart battery chipsets used in laptop batteries, such as BQ2040, BQ2060, BQ2084, M37515, M37516, PS331 and many others. You can check the full list of supported chipsets on the official website of the developer, SB Project. Sbworkshop 3.71 is not a free software; it requires a license key to activate and use its full features. The license key costs $159.95 USD and can be purchased from the SB Project website as well.
To use sbworkshop 3.71, you will need some basic tools and skills to access the EEPROM chip of your smart battery. You will have to unsolder the chip from the battery and connect it to a Philis Standard I2C Parallel Port Adapter, which is a device that allows you to communicate with the chip via your computer's LPT port. You can find instructions on how to build the adapter yourself on the SB Project website, or you can buy one from them for $29.95 USD.
Once you have connected the chip to the adapter and your computer, you can launch sbworkshop 3.71 and start modifying the data on the chip. You can read all the data stored on the chip, such as serial number, manufacturer name, design capacity, cycle count and more. You can also write new data to the chip or edit existing data. Before making any changes to the chip, it is recommended to back up the original data by dumping it to a file. If anything goes wrong with the operation, you can always restore the data from the file.
One of the most useful features of sbworkshop 3.71 is the reset function, which allows you to reset the smart battery EEPROM to its initial state. This will erase all the data on the chip except for the manufacture date, which will be changed to the current system date. This will also clear any permanent failure flags that may have locked or blocked your battery from functioning properly. After resetting the chip, you will have a \"new label\" battery that should perform better and last longer.
Sbworkshop 3.71 is a powerful software tool that can help you improve your smart battery performance and extend its life. However, it is not a magic solution that can fix any battery problem or revive a dead battery. It is also not a simple or risk-free procedure that anyone can do without proper knowledge and equipment. You should only use sbworkshop 3.71 if you have experience with electronic components and soldering skills, and if you are willing to take full responsibility for any damage or injury that may occur during or after using it. 061ffe29dd