Lenovo G460 Bios Update Download ##HOT##
Click Here > https://urluss.com/2tzXs3
How to Download and Install Lenovo G460 BIOS Update
If you own a Lenovo G460 laptop, you may want to update your BIOS to the latest version to fix some issues and improve the performance of your device. BIOS stands for Basic Input/Output System, and it is a firmware that controls the booting process and the communication between the hardware and the operating system. Updating the BIOS can help resolve compatibility problems, enhance security, and optimize the system settings.
However, updating the BIOS is not a simple task, and it requires some precautions and steps to avoid damaging your laptop. In this article, we will show you how to download and install Lenovo G460 BIOS update safely and easily.
Step 1: Check Your BIOS Version
Before you download and install Lenovo G460 BIOS update, you need to check your current BIOS version to see if you need to update it or not. To do this, follow these steps:
Restart your laptop and press F2 repeatedly to enter the BIOS setup menu.
On the main screen, look for the BIOS version information. It should be something like 29CNxxWW, where xx is a number.
Note down your BIOS version and exit the BIOS setup menu by pressing F10 and selecting Yes.
If your BIOS version is higher than 29CN26WW (V2.03), then you can directly update to 29CN38WW (V2.15) or the latest BIOS version available on Lenovo's website[^1^]. If your BIOS version is lower than 29CN26WW (V2.03), then you need to contact a local Lenovo service provider to update your BIOS first[^4^].
Step 2: Download Lenovo G460 BIOS Update
Once you have checked your BIOS version, you can proceed to download Lenovo G460 BIOS update from Lenovo's official website. To do this, follow these steps:
Go to Lenovo's support page for Lenovo G460 laptop.
Select Drivers & Software from the menu.
Select BIOS/UEFI from the sub-menu.
Select BIOS Update from the list of available drivers.
Select your operating system from the drop-down menu.
Click on Download File to download the BIOS update file. It should be named something like NIWEx215_X32.exe or NIWEx215_X64.exe, depending on your operating system.
Save the file to a convenient location on your laptop or on a USB flash drive.
Step 3: Install Lenovo G460 BIOS Update
After you have downloaded Lenovo G460 BIOS update file, you can install it on your laptop. To do this, follow these steps:
Make sure your laptop is plugged into a power source and has at least 50% battery charge.
Close all running programs and back up any important data before proceeding.
Locate the BIOS update file that you have downloaded and double-click on it. If you are using Windows Vista or Windows 7, you may need to run it as administrator by right-clicking on it and selecting Run as administrator.
Click on Install and follow the on-screen instructions.
Click on Flash BIOS and press Enter to start flashing. Do not turn off your laptop or interrupt the process during this time.
When the update finishes, your laptop will automatically reboot for the changes to take effect.
Enter the BIOS setup menu again by pressing F2 repeatedly during booting.
Load the default settings by pressing F9 and selecting Yes.
Save and exit the BIOS setup menu by pressing F10 and selecting Yes.
Reboot your laptop again and enjoy the new BIOS features.
Congratulations! You have successfully downloaded and installed Lenovo G460 BIOS update on your laptop. You can now enjoy improved performance, security, and compatibility of 061ffe29dd