Adjprog Epson Sx218 Download
LINK ->>->>->> https://bytlly.com/2tBwuy
How to Reset Waste Ink Pad Counter of Epson Stylus SX218 Printer
If you own an Epson Stylus SX218 printer, you may encounter a problem where the printer stops working and displays an error message like "A printer's ink pad is at the end of its service life. Please contact Epson Support." This means that the waste ink pad counter has reached its limit and needs to be reset.
The waste ink pad is a part of the printer that absorbs excess ink during printing, cleaning, and maintenance. Over time, the pad gets saturated with ink and needs to be replaced or cleaned. However, replacing or cleaning the pad is not enough to solve the problem. You also need to reset the waste ink pad counter using a special software called Epson SX218 Adjustment Program.
The Epson SX218 Adjustment Program is a utility program that allows you to perform various functions on your printer, such as resetting the waste ink pad counter, prescribing the print head ID, doing printer initialization, and more. The program works only with USB connection on Windows operating system. You can buy the program online from various websites, such as ORPYS[^2^], for a small fee.
To use the program, you need to follow these steps:
Download and extract the Epson SX218 Adjustment Program from the website where you bought it.
Run the AdjProg.exe file as administrator.
Select your printer model and port from the drop-down menus.
Click Particular adjustment mode.
Select Waste ink pad counter from the Maintenance list and click OK.
Check the boxes for Main pad counter and FL Box Counter and click Check to see the current values.
Click Initialization to reset the counters to zero.
Turn off your printer and then turn it on again.
Click Finish to exit the program.
Congratulations! You have successfully reset the waste ink pad counter of your Epson Stylus SX218 printer. You can now resume printing without any error messages. However, keep in mind that resetting the counter does not solve the underlying problem of the waste ink pad being full or dirty. You may need to replace or clean the pad periodically to prevent ink leakage or damage to your printer.
If you want to clean the waste ink pad of your Epson Stylus SX218 printer, you need to follow these steps:
Turn off your printer and unplug it from the power source.
Open the printer cover and locate the waste ink pad. It is usually a sponge-like material at the bottom of the printer.
Carefully remove the waste ink pad from the printer. You may need to use a pair of tweezers or a screwdriver to pry it out.
Wash the waste ink pad with warm water and mild detergent until it is clean. You can also use a soft brush to scrub off any stubborn ink stains.
Squeeze out the excess water from the waste ink pad and let it dry completely.
Reinstall the waste ink pad in the printer and close the cover.
Note that cleaning the waste ink pad may not be enough to restore its full capacity. You may need to replace it with a new one if it is too worn out or damaged. You can buy a compatible waste ink pad online or from an authorized Epson dealer.
Another way to prevent the waste ink pad from getting full is to use an external waste ink tank. This is a device that collects the excess ink from the printer and stores it in a separate container. You can buy an external waste ink tank online or make one yourself using some simple materials. To use an external waste ink tank, you need to follow these steps:
Turn off your printer and unplug it from the power source.
Open the printer cover and locate the waste ink tube. It is usually a thin plastic tube that connects the waste ink pad to the print head.
Cut the waste ink tube near the print head using a sharp knife or scissors. Be careful not to damage any other parts of the printer.
Attach one end of the waste ink tube to the external waste ink tank using a hose clamp or tape. Make sure there are no leaks or air bubbles in the connection.
Place the external waste ink tank in a safe and stable location, away from children and pets. You can also secure it with some adhesive tape or velcro.
Turn on your printer and test it by printing a few pages. Check if there are any errors or problems with the print quality.
Using an external waste ink tank can extend the life of your printer and save you money on replacing or cleaning the waste ink pad. However, you need to monitor the level of ink in the tank and empty it when it is full. You also need to reset the waste ink pad counter using the Epson SX218 Adjustment Program every time you empty the tank. 061ffe29dd