Forum | March for The Arts

Lasercut 5.3 Download Windows 7

How to Install and Use Lasercut 5.3 Software for Windows 7

Lasercut 5.3 is a software package that allows you to control and operate a CO2 laser engraving and cutting machine from your Windows 7 computer. It can import vector files from various drawing programs, such as CorelDraw, Adobe Illustrator, AutoCAD, Inkscape, or 2D Design, and send them to the laser cutter for cutting or engraving. It also provides functions to simulate, preview, and configure the cutting process.

In this article, we will show you how to download, install, and use Lasercut 5.3 software for Windows 7. You will need a laser cutter machine that is compatible with Lasercut 5.3, a USB dongle that contains the software license, and a USB cable that connects the computer and the laser cutter.

Downloading Lasercut 5.3 Software

You can download the Lasercut 5.3 installation files from this link. The zip file contains three folders: Lasercut 5.3 - Control Software, Driver - Softdog USB Dongle, and Driver - Laser Cutter. Extract the files from the zip file to a new directory on your computer.

Installing Lasercut 5.3 Software

To install Lasercut 5.3 software, follow these steps:

Run the \"Setup.exe\" program from within the Lasercut 5.3 - Control Software folder. This will start the installation of Lasercut 5.3 software.

Install Lasercut using the default settings. The 'Lasercut53' type is a standalone version of Lasercut that can be used in demonstration mode without the need for the USB dongle.

The program will install Lasercut, the drivers for the USB dongle, and the drivers for the laser cutter.

Once complete, navigate to the newly created folder to start the program.

Checking the Drivers

Connect both the laser cutter and the USB dongle to the computer. If the drivers have installed correctly, they will appear in the device manager as shown below:

If the USB dongle has not installed correctly, it will appear as EZ-USB-FX2 with a warning symbol next to it. To manually update the driver, right-click on the item in device manager and select Update driver. Then manually select the folder Driver - Softdog USB Dongle from the downloaded files. Windows will then determine which driver is best for your version of Windows and update appropriately.

Running Lasercut 5.3 Software

There are two versions of Lasercut located within the program path: a full version and a demonstration version.

The full version of Lasercut, \"Lasercut53.exe\", will only run if the USB dongle is connected to the computer. This version gives you complete control over the laser cutter. You can download jobs to the laser, adjust the cutting position, and start a job all from within Lasercut.

The demo version of Lasercut, \"Lasercut53_Demo.exe\", will run even if the USB dongle is not present. This version of the software has limited capabilities; in particular it does not allow you to save your work and it does not connect to the laser cutter (the program will crash if this is attempted). There are workarounds that allow you to prepare files while using the demonstration version.

For the first execution of Lasercut software, simply run the appropriate labeled \".bat\" file from the install directory. Lasercut extracts laser cutter information from the \"syscfg.ini\" file stored next to its executable. This file contains information about the size of the machine, the maximum speed of the 061ffe29dd