Gemel Serpi Star User Manual
Download File === https://tiurll.com/2tyG0Z
Gemel Serpi Star User Manual: How to Install and Operate Your New Alarm System
If you are looking for a reliable and easy-to-use alarm system for your car, you might want to consider the Gemel Serpi Star. This alarm system offers a range of features and functions that can protect your vehicle from theft and vandalism. In this user manual, we will guide you through the installation and operation of your new alarm system.
What's in the Box?
Before you start installing your Gemel Serpi Star alarm system, make sure you have all the components and accessories that come with it. The box should contain:
The main unit (the black box with wires)
The siren (the white cone-shaped device)
The remote control (the key fob with buttons)
The LED indicator (the small red light)
The shock sensor (the small black box with a knob)
The valet switch (the small black button)
The wiring harness (the bundle of wires with connectors)
The installation manual (this booklet)
How to Install Your Gemel Serpi Star Alarm System?
Installing your Gemel Serpi Star alarm system is not very difficult, but it requires some basic knowledge of car wiring and electronics. If you are not confident or experienced in this field, we recommend that you seek professional help from a qualified technician. Otherwise, you can follow these steps:
Disconnect the negative terminal of your car battery to avoid any short circuits or damage to your car's electrical system.
Find a suitable location for the main unit inside your car, preferably under the dashboard or behind the glove box. Make sure it is hidden from view and away from any heat sources or moving parts. Secure it with screws or zip ties.
Find a suitable location for the siren under the hood of your car, preferably near the firewall or the radiator. Make sure it is facing downwards and away from any heat sources or moving parts. Secure it with screws or zip ties.
Find a suitable location for the LED indicator on your dashboard or console. Make sure it is visible from outside and inside your car. Drill a small hole if necessary and insert the LED indicator through it. Secure it with the nut provided.
Find a suitable location for the shock sensor inside your car, preferably under the dashboard or behind the glove box. Make sure it is away from any heat sources or moving parts. Secure it with screws or zip ties.
Find a suitable location for the valet switch inside your car, preferably near the driver's seat or under the steering wheel. Make sure it is accessible but hidden from view. Drill a small hole if necessary and insert the valet switch through it. Secure it with the nut provided.
Connect the wiring harness to the main unit according to the color-coded diagram provided in the installation manual. Make sure all the connections are tight and secure.
Connect the other end of the wiring harness to your car's electrical system according to the color-coded diagram provided in the installation manual. You may need to splice some wires or use some connectors depending on your car's model and make. Make sure all the connections are tight and secure.
Reconnect the negative terminal of your car battery and test your alarm system by following the instructions in the next section.
How to Operate Your Gemel Serpi Star Alarm System?
Operating your Gemel Serpi Star alarm system is very simple and intuitive. You can use the remote control or the valet switch to control your alarm system. Here are some basic functions and features:
To arm your alarm system, press the lock button on your remote control. You will hear one beep from the siren and see one flash from the LED indicator. Your doors will lock automatically if they are connected to your alarm system.
To disarm your alarm system, press the unlock button on your remote control. You will hear two beeps from the siren and see two flashes from the LED indicator. Your doors will unlock automatically if they are connected to your alarm system.
To activate or deactivate the shock sensor, press and hold the lock button on your remote control for three seconds. You will hear three beeps from the siren and see three 061ffe29dd